We all know what a powerful medicine marijuana and hemp are, so we here at Green Harvest try to make it easy for you to procure your medicine. To make short work of getting the keif and hash from your trim read on…

The BubbleMaster (formerly Bubbleator) wet system is an efficient and easy to use method of extracting resin; in this handy machine you can wash the same material up to 3 x  and still gather hash ( CHECK OUT OUR HOLY HASH FEST BLOG)  but you do this only AFTER you have tumbled it in our PollenMaster ( formerly Pollinator) to gather the keif.

PollenMaster Instructions

1. Before using the PollenMaster machine we highly recommend that you freeze your material for 2+ hours in a plastic bag. The longer the better as we are dealing with a FAT molecule and fat takes alot longer to freeze than water. This will harden your plant material allowing the resin to freeze and fall from the plant material easier, making the sieving process considerably more efficient. Leaf should be separated from stem and tumbled separately. When tumbling stems they should be cut into 1-2 inch pieces.
2. Now that leaf material is ready to be sifted you can open the lid of the PollenMaster and then gently lift the drum out.

Note: Lift the drum out on the opposite side of the motor first.

1. Now that you have removed the drum you can open it to insert your leaf material.  The lid of the drum is magnetically attached so you may need to firmly pull it off.   Close the lid of the drum and then gently put the drum back in the PollenMaster, motor side first.
2. You can now turn on your PollenMaster. We recommend the first session be between 2-5 minutes in order to collect the purest quality of fallen resin glands. A kitchen timer should be used to keep track of the sifting sessions. Stems should be tumbled for a longer period of time due to the fact that there is no plant matter that can be broken down and get through the screen and pollute your end product. If you save your trim for the winter months this can be done outside where the material will stay cold longer.
3. Remove the drum and using a clean stiff paint brush, gently brush all the trichomes off of the drum, off the inside of the box into a pile and use a card to pick up the trichomes and seal in an airtight jar for optimum freshness.
4. Remove the material and refreeze it so you can wash it later.

It is now time to wash all of those valuable resin glands into any number of IceMaster bags to be dried and stored.

Included with your BUBBLEMASTER 3 bag system:

• Pyramid work bag 220mc

• Cleaner bag 220mc

• Crystal catching bags 70 & 38

• Extra bags available depending on model: 185mc for additional filtration; 120, 90, 45 & 25 for additional separation

Additional requirements:

• 1 x 5 gallon bucket

• Paper towels or clean cotton dish towel

• 1 bag ice cubes, enough to keep the water temperature down to 4C (41F) or that ice remains floating in the water

• stainless steel Kitchen sieve

Additional Tips;

-The material must be frozen, the longer the better.

-Always ensure that your water is cold enough, there should be ice floating in the water at all times.

-Be sure to rinse your BubbleMaster well after your last run…lots of crystal can get caught up in the washer and the hose.

The Process:

1) Place your BubbleMaster on the kitchen counter and the bucket in the sink. Place the screen bags in the 5 gallon bucket, from finest to coarsest (numbers in ascending order).

2) Fill the BubbleMaster with 1/2 a bag of ice and add cold water to 3/4 full.

3) Set the BubbleMaster to run for 2 minutes to mix the ice and water.

3) Fill the pyramid bag with up to 300 grams of frozen leaf material (fresh or dry) and place it in the BubbleMaster and set the timer for 8 minutes, rest for 10 minutes then repeat 2 more times.

4) Open the lid and squeeze all the water out of the leaf material in the pyramid bag. Hang the hose in the bucket and let the BubbleMaster drain.

5) Hook the hose back onto the BubbleMaster . Remove the 220mc cleaner bag from the bucket, it will contain only leaf material. Remove the second bag, dunk it into the water 3 or 4 times, to collect all the crystals in the center of the screen. Gently squeeze all the water out by hand first, then wrap the screen in a piece of paper towel or clean dish towel, pat gently to avoid mashing crystals into the screen. If you have multiple crystal catching bags, then repeat for each bag.

6) Remove the crystals from the bag, place them in the kitchen sieve and push them through (with a spoon) onto a piece of paper or brown cardboard. This ensures that the crystals are separated and dry quickly and evenly. Allow 48+ hours for complete drying to avoid molding. Repeat steps 5 and 6 for the additional screen bags.

It is recommended that you repeat the washing process up to 3 times with each pyramid bag fill, but ensure that the water has ice floating in it. You should rinse all of the screen bags with cold water immediately after use. If you feel that the holes in the screens are clogging up, use alcohol (96%) on a piece of cloth to gently clean the screen.

Questions or for more information call Green Harvest at 866-727-9333.